Takaab 4PAD - Quad Passive Pad / Preset Attenuator / Output Module

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab 4PAD - Quad Passive Pad / Preset Attenuator / Output ModuleA quad passive fixed attenuator with three level drop presets per channel, configurable via jumpers on the rear of the module. Useful for dropping hot eurorack signals to line level for use with non eurorack gear, or as a simple output module. Jumper Settings Jump middle pin to left pin = 9. 79dB (38% drop) Jump middle pin to right pin = 18. 29dB (88% drop) Omit jumper = 6. 02db (50% drop)

At the power stage there are component footprints for one series component and two rail-to-ground-components per rail for your protection and filtering components

You shouldn't need to touch these unless you hear an issue with the modulator sound and know what you are doing

when self patched for example from AC output into CV input can be used to modulate curve to be linear or exponential

5V – 10V and up to 10KHz will output clock signals at divisions of 1/3

Noise & Ripple -12V: < 80mV @ 1A

10V peak-to-peak

but any 4HP (or smaller) power module should fit

You can actually use the 2HWR in reverse

5mm pitch)

The sound can range from wacky sound effects (a la 1950's and 60's sci-fi) but it can also create very musical

EOC outputs

snappy sounds

Exchange/Return Notes