Multi Metallographic Mount Holder, 1-1/2

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Multi Metallographic Mount Holder, 1-1/2" and 38-40mmDESCRIPTION Multi Metallographic Mount Holder, 1 1 2" and 38 40mm Specimen holder for 3 x 1 1 2" and 38 40mm metallographic mounts. Holder height is 0. 41" (10. 4mm), with recessed areas 0. 31" (7. 9mm) deep. Open sides for easier sample removal. Material: machined aluminum with stainless steel allen screws. Allen wrench included. Shown holding three metallographic mounts (not included). Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

Overall size is 55 x 51 x 10

these parts are interchangeable with FEI parts

57 x 57 x 10mm

Contains mineral spirits and isopropyl alcohol

austenitic steel (material number 1

Slot 1x2mm

and close quality inspection

stainless steel blades

01844G-F - Carbon Film only on 400 mesh

MMTMEC and MTFML DESCRIPTION

Tip Geometry: Rotated (Symmetric) Tip Height: 4 - 10 Front Angle: 25 ± 2

Al Reflex coating DESCRIPTION