Takaab 3HWR - Triple Passive Half Wave Rectifier

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab 3HWR - Triple Passive Half Wave RectifierPassive, diode rectification. Each of the three gates has one input and two outputs. Assuming an AC signal at the input, the first (+ve) out will output only the positive part of the original signal. Conversely the ve out will output any negative voltage parts of the signal. Note that there is a drop of approximately 0. 3V. You can actually use the 3HWR in reverse. Using the OUTs as INs and the IN as an OUT will rectify both signals then sum them

while saw-tooth and square waves spit out harder more gritty sounds

1 set includes three boards

Takaab 2AND - Dual AND Gate

2A on both the +12v and -12v rails

The base-plate of the Shell features two built-in power-bus strips with a total of 27 non-shrouded headers

albeit less responsively and non-linear

3 stage (A-B-C - middle position) or 4 stage (A-B-C-D) switching pattern

so that the envelope ranges from 0 to -10v

Auto-Offset Jumper: Normalises CV INV applying a +5V offset to achieve unity gain

Similarly there are a pair of solder-jumpers on the board which allow the switching of the two inputs routing to the carrier and modulator of the ring mod

Four flavours of fricasseed field vole are attainable via the ‘type’ switch

The EG-CVX expands on the Takaab EG

Exchange/Return Notes