Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Spider Webs Texture MatMat measures 3 inches x 3 inches IMPORTANT: Use with scrap clay first to remove any residue that may remain from the cutting process. USAGE Use some scrap clay to remove possible dust before use As the clay will lose a bit of thickness when you roll the mat on clay, prepare a clay slab thicker than the final thickness you want Place the texture mat on top of clay and use a roller to push the mat into the clay Gently peel off the mat and cut the shape

- As the clay will lose a bit of thickness when you roll the mat on clay

Please don't use any sharp objects on the mat as it could ruin the engraved design

making sure to press the clay onto the tile or glass before using your cutter to avoid having the clay stick to your cutter

They should be washed with warm soapy water as needed

All of our cutters are 3D printed with PLA filament and may have some moderate irregularities that are to be expected with any 3D printed polymer clay cutter

This set comes with three moon phase cutters

but this will not affect the quality of your cutter or your cuts

5 inch sizing

Wash with warm water and soap

Use a generous amount of corn starch or water to prevent your clay from sticking to all your cutters with fine details

You always want to use a ceramic tile or a piece of glass under your clay

Due to cutter detail

Exchange/Return Notes